Current File : //usr/share/perl5/vendor_perl/Mail/SpamAssassin/Plugin/DNSEval.pm

# <@LICENSE>
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to you under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at:
# 
#     http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# </@LICENSE>

=head1 NAME

DNSEVAL - look up URLs against DNS blocklists

=cut


package Mail::SpamAssassin::Plugin::DNSEval;

use Mail::SpamAssassin::Plugin;
use Mail::SpamAssassin::Logger;
use Mail::SpamAssassin::Constants qw(:ip);
use Mail::SpamAssassin::Util qw(reverse_ip_address);

use strict;
use warnings;
use bytes;
use re 'taint';

use vars qw(@ISA);
@ISA = qw(Mail::SpamAssassin::Plugin);

# constructor: register the eval rule
sub new {
  my $class = shift;
  my $mailsaobject = shift;

  # some boilerplate...
  $class = ref($class) || $class;
  my $self = $class->SUPER::new($mailsaobject);
  bless ($self, $class);

  # this is done this way so that the same list can be used here and in
  # check_start()
  $self->{'evalrules'} = [
    'check_rbl_accreditor',
    'check_rbl',
    'check_rbl_txt',
    'check_rbl_sub',
    'check_rbl_results_for',
    'check_rbl_from_host',
    'check_rbl_from_domain',
    'check_rbl_envfrom',
    'check_dns_sender',
  ];

  foreach(@{$self->{'evalrules'}}) {
    $self->register_eval_rule($_);
  }

  return $self;
}

# this is necessary because PMS::run_rbl_eval_tests() calls these functions
# directly as part of PMS
sub check_start {
  my ($self, $opts) = @_;

  foreach(@{$self->{'evalrules'}}) {
    $opts->{'permsgstatus'}->register_plugin_eval_glue($_);
  }
}

sub ip_list_uniq_and_strip_private {
  my ($self, @origips) = @_;
  my @ips;
  my %seen;
  my $IP_PRIVATE = IP_PRIVATE;
  foreach my $ip (@origips) {
    next unless $ip;
    next if (exists ($seen{$ip})); $seen{$ip} = 1;
    next if ($ip =~ /$IP_PRIVATE/o);
    push(@ips, $ip);
  }
  return @ips;
}

# check an RBL if the message contains an "accreditor assertion,"
# that is, the message contains the name of a service that will vouch
# for their practices.
#
sub check_rbl_accreditor {
  my ($self, $pms, $rule, $set, $rbl_server, $subtest, $accreditor) = @_;

  if (!defined $pms->{accreditor_tag}) {
    $self->message_accreditor_tag($pms);
  }
  if ($pms->{accreditor_tag}->{$accreditor}) {
    $self->check_rbl_backend($pms, $rule, $set, $rbl_server, 'A', $subtest);
  }
  return 0;
}

# Check for an Accreditor Assertion within the message, that is, the name of
#	a third-party who will vouch for the sender's practices. The accreditor
#	can be asserted in the EnvelopeFrom like this:
#
#	    listowner@a--accreditor.mail.example.com
#
#	or in an 'Accreditor" Header field, like this:
#
#	    Accreditor: accreditor1, parm=value; accreditor2, parm-value
#
#	This implementation supports multiple accreditors, but ignores any
#	parameters in the header field.
#
sub message_accreditor_tag {
  my ($self, $pms) = @_;
  my %acctags;

  if ($pms->get('EnvelopeFrom:addr') =~ /[@.]a--([a-z0-9]{3,})\./i) {
    (my $tag = $1) =~ tr/A-Z/a-z/;
    $acctags{$tag} = -1;
  }
  my $accreditor_field = $pms->get('Accreditor',undef);
  if (defined $accreditor_field) {
    my @accreditors = split(/,/, $accreditor_field);
    foreach my $accreditor (@accreditors) {
      my @terms = split(' ', $accreditor);
      if ($#terms >= 0) {
	  my $tag = $terms[0];
	  $tag =~ tr/A-Z/a-z/;
	  $acctags{$tag} = -1;
      }
    }
  }
  $pms->{accreditor_tag} = \%acctags;
}

sub check_rbl_backend {
  my ($self, $pms, $rule, $set, $rbl_server, $type, $subtest) = @_;
  local ($_);

  # First check that DNS is available, if not do not perform this check
  return 0 if $self->{main}->{conf}->{skip_rbl_checks};
  return 0 unless $pms->is_dns_available();
  $pms->load_resolver();

  if (($rbl_server !~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) &&
      (index($rbl_server, '.') >= 0) &&
      ($rbl_server !~ /\.$/)) {
    $rbl_server .= ".";
  }

  dbg("dns: checking RBL $rbl_server, set $set");

  # ok, make a list of all the IPs in the untrusted set
  my @fullips = map { $_->{ip} } @{$pms->{relays_untrusted}};

  # now, make a list of all the IPs in the external set, for use in
  # notfirsthop testing.  This will often be more IPs than found
  # in @fullips.  It includes the IPs that are trusted, but
  # not in internal_networks.
  my @fullexternal = map {
	(!$_->{internal}) ? ($_->{ip}) : ()
      } @{$pms->{relays_trusted}};
  push (@fullexternal, @fullips);	# add untrusted set too

  # Make sure a header significantly improves results before adding here
  # X-Sender-Ip: could be worth using (very low occurance for me)
  # X-Sender: has a very low bang-for-buck for me
  my $IP_ADDRESS = IP_ADDRESS;
  my @originating;
  for my $header (@{$pms->{conf}->{originating_ip_headers}}) {
    my $str = $pms->get($header,undef);
    next unless defined $str && $str ne '';
    push (@originating, ($str =~ m/($IP_ADDRESS)/g));
  }

  # Let's go ahead and trim away all private ips (KLC)
  # also uniq the list and strip dups. (jm)
  my @ips = $self->ip_list_uniq_and_strip_private(@fullips);

  # if there's no untrusted IPs, it means we trust all the open-internet
  # relays, so we can return right now.
  return 0 unless (scalar @ips + scalar @originating > 0);

  dbg("dns: IPs found: full-external: ".join(", ", @fullexternal).
	" untrusted: ".join(", ", @ips).
	" originating: ".join(", ", @originating));

  my $trusted = $self->{main}->{conf}->{trusted_networks};

  # If name is foo-notfirsthop, check all addresses except for
  # the originating one.  Suitable for use with dialup lists, like the PDL.
  # note that if there's only 1 IP in the untrusted set, do NOT pop the
  # list, since it'd remove that one, and a legit user is supposed to
  # use their SMTP server (ie. have at least 1 more hop)!
  # If name is foo-lastexternal, check only the Received header just before
  # it enters our internal networks; we can trust it and it's the one that
  # passed mail between networks
  if ($set =~ /-(notfirsthop|lastexternal)$/)
  {
    # use the external IP set, instead of the trusted set; the user may have
    # specified some third-party relays as trusted.  Also, don't use
    # @originating; those headers are added by a phase of relaying through
    # a server like Hotmail, which is not going to be in dialup lists anyway.
    @ips = $self->ip_list_uniq_and_strip_private(@fullexternal);
    if ($1 eq "lastexternal") {
      @ips = (defined $ips[0]) ? ($ips[0]) : ();
    } else {
	pop @ips if (scalar @ips > 1);
    }
  }
  # If name is foo-firsttrusted, check only the Received header just
  # after it enters our trusted networks; that's the only one we can
  # trust the IP address from (since our relay added that header).
  # And if name is foo-untrusted, check any untrusted IP address.
  elsif ($set =~ /-(first|un)trusted$/)
  {
    my @tips;
    foreach my $ip (@originating) {
      if ($ip && !$trusted->contains_ip($ip)) {
        push(@tips, $ip);
      }
    }
    @ips = $self->ip_list_uniq_and_strip_private (@ips, @tips);
    if ($1 eq "first") {
      @ips = (defined $ips[0]) ? ($ips[0]) : ();
    } else {
      shift @ips;
    }
  }
  else
  {
    my @tips;
    foreach my $ip (@originating) {
      if ($ip && !$trusted->contains_ip($ip)) {
        push(@tips, $ip);
      }
    }

    # add originating IPs as untrusted IPs (if they are untrusted)
    @ips = reverse $self->ip_list_uniq_and_strip_private (@ips, @tips);
  }

  # How many IPs max you check in the received lines
  my $checklast=$self->{main}->{conf}->{num_check_received};

  if (scalar @ips > $checklast) {
    splice (@ips, $checklast);	# remove all others
  }

  my $tflags = $pms->{conf}->{tflags}->{$rule};

  # Trusted relays should only be checked against nice rules (dnswls)
  if (defined $tflags && $tflags !~ /\bnice\b/) {
    # remove trusted hosts from beginning
    while (@ips && $trusted->contains_ip($ips[0])) { shift @ips }
  }

  unless (scalar @ips > 0) {
    dbg("dns: no untrusted IPs to check");
    return 0;
  }

  dbg("dns: only inspecting the following IPs: ".join(", ", @ips));

  eval {
    foreach my $ip (@ips) {
      my $revip = reverse_ip_address($ip);
      $pms->do_rbl_lookup($rule, $set, $type,
                          $revip.'.'.$rbl_server, $subtest) if defined $revip;
    }
  };

  # note that results are not handled here, hits are handled directly
  # as DNS responses are harvested
  return 0;
}

sub check_rbl {
  my ($self, $pms, $rule, $set, $rbl_server, $subtest) = @_;
  $self->check_rbl_backend($pms, $rule, $set, $rbl_server, 'A', $subtest);
}

sub check_rbl_txt {
  my ($self, $pms, $rule, $set, $rbl_server, $subtest) = @_;
  $self->check_rbl_backend($pms, $rule, $set, $rbl_server, 'TXT', $subtest);
}

# run for first message 
sub check_rbl_sub {
  my ($self, $pms, $rule, $set, $subtest) = @_;

  return 0 if $self->{main}->{conf}->{skip_rbl_checks};
  return 0 unless $pms->is_dns_available();

  $pms->register_rbl_subtest($rule, $set, $subtest);
}

# backward compatibility
sub check_rbl_results_for {
  #warn "dns: check_rbl_results_for() is deprecated, use check_rbl_sub()\n";
  check_rbl_sub(@_);
}

# this only checks the address host name and not the domain name because
# using the domain name had much worse results for dsn.rfc-ignorant.org
sub check_rbl_from_host {
  _check_rbl_addresses(@_, $_[1]->all_from_addrs());
}

=over 4

=item check_rbl_from_domain

This checks all the from addrs domain names as an alternate to check_rbl_from_host

=cut
sub check_rbl_from_domain {
  _check_rbl_addresses(@_, $_[1]->all_from_addrs_domains());
}

=item has_check_rbl_from_domain

Adds capability check for "if can()" for check_rbl_from_domain

=cut
sub has_check_rbl_from_domain { 1 }

# this only checks the address host name and not the domain name because
# using the domain name had much worse results for dsn.rfc-ignorant.org
sub check_rbl_envfrom {
  _check_rbl_addresses(@_, $_[1]->get('EnvelopeFrom:addr',undef));
}

sub _check_rbl_addresses {
  my ($self, $pms, $rule, $set, $rbl_server, @addresses) = @_;
  
  return 0 if $self->{main}->{conf}->{skip_rbl_checks};
  return 0 unless $pms->is_dns_available();

  my %hosts;
  for (@addresses) {
    next if !defined($_) || !/ \@ ( [^\@\s]+ )/x;
    my $address = $1;
    # strip leading & trailing dots (as seen in some e-mail addresses)
    $address =~ s/^\.+//; $address =~ s/\.+\z//;
    # squash duplicate dots to avoid an invalid DNS query with a null label
    $address =~ tr/.//s;
    $hosts{lc($address)} = 1  if $address =~ /\./;  # must by a FQDN
  }
  return unless scalar keys %hosts;

  $pms->load_resolver();

  if (($rbl_server !~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) &&
      (index($rbl_server, '.') >= 0) &&
      ($rbl_server !~ /\.$/)) {
    $rbl_server .= ".";
  }
  dbg("dns: _check_rbl_addresses RBL $rbl_server, set $set");

  for my $host (keys %hosts) {
    dbg("dns: checking [$host] / $rule / $set / $rbl_server");
    $pms->do_rbl_lookup($rule, $set, 'A', "$host.$rbl_server");
  }
}

sub check_dns_sender {
  my ($self, $pms, $rule) = @_;

  my $host;
  for my $from ($pms->get('EnvelopeFrom:addr',undef)) {
    next unless defined $from;

    $from =~ tr/././s;		# bug 3366
    if ($from =~ m/ \@ ( [^\@\s]+ \. [^\@\s]+ )/x ) {
      $host = lc($1);
      last;
    }
  }
  return 0 unless defined $host;

  # First check that DNS is available, if not do not perform this check
  # TODO: need a way to skip DNS checks as a whole in configuration
  return 0 unless $pms->is_dns_available();
  $pms->load_resolver();

  if ($host eq 'compiling.spamassassin.taint.org') {
    # only used when compiling
    return 0;
  }

  dbg("dns: checking A and MX for host $host");

  $pms->do_dns_lookup($rule, 'A', $host);
  $pms->do_dns_lookup($rule, 'MX', $host);

  # cache name of host for later checking
  $pms->{sender_host} = $host;

  return 0;
}

1;